connecteur 8 points IP68 CMA SD de BERNIER Connect, fiche et embase en acier inoxydable BERNIER Connect CMA SD 8-pin IP68 connector, stainless steel plug and receptacle

Case study: an 8-pin IP68 connector under 16 mm for a military sensor

A military sensor manufacturer approached us while developing a new embedded sensor. Specifically, they needed a rugged 8-pin IP68 connector with a diameter under 16 mm (0.63 in). After reviewing the specification, our team selected the CMA SD connector, the smallest circular connector in the BERNIER Connect range. This case study looks at the project’s constraints and the reasons behind that choice.

Key advantages of the BERNIER Connect CMA SD connector

  • a stainless steel shell
  • enhanced IP68 sealing, both mated and unmated (4 m / 13 ft for 24 h)
  • up to 10 Gb Ethernet
  • long service life: up to 5,000 mating cycles
  • the CMA connector range was created by BERNIER Connect and keeps evolving with defense equipment

The customer’s need at a glance

  • customer: a sensor manufacturer for defense electronics
  • need: an 8-pin connector, IP68 sealed to 2 m (6.6 ft) for 24 h, under 16 mm in diameter, for low-power 24 V signals and a 1 Gigabit Ethernet link
  • solution: the 8-contact CMA SD connector, IP68 sealed to 4 m (13 ft) for 24 h, with data rates up to 10 Gb Ethernet
  •  

A specification with little room to maneuver

  • 8 contacts
  • IP68 sealing to 2 m (6.6 ft) for 24 h, unmated
  • maximum diameter of 16 mm (0.63 in)
  • low-power signals: 24 V, a few mA
  • 1 Gigabit Ethernet compatibility under consideration

Taken one by one, each constraint is manageable. Combined, however, they sharply narrow the range of available connectors.

Why do standard connectors reach their limits in defense applications?

Standard connectors struggle to combine contact density, sealing and a small footprint. Moreover, military embedded electronics also demand resistance to shock, vibration and temperature swings. Therefore, miniaturization must not come at the expense of ruggedness. That is why the answer lies with miniature circular connectors designed for defense and aerospace.

The CMA SD connector: a proven miniature 8-pin IP68 connector

The CMA SD connector is the smallest circular connector in the BERNIER Connect range. This stainless steel push-pull connector fits 8 contacts into a diameter under 16 mm. In addition, it stays IP68 sealed down to 4 m (13 ft) for 24 hours, even when unmated.

The CMA SD connector handles low-power 24 V signals and also supports Ethernet links up to 10 Gigabit. In fact, connected sensor manufacturers increasingly look for this capability.

The CMA connector, short for Connecteur Multicontacts Audio, carries the history of BERNIER Connect, the original manufacturer of the range. Today, the SD version extends this heritage to today’s miniaturization needs with an 8-contact layout, without compromising reliability. A 19-contact layout is also available.

Questions about the CMA SD connector

How do you choose a connector for a military sensor?

First, set the number of contacts, the sealing level (immersion depth and duration) and the maximum diameter. Then come voltage, current, data rate, temperature range and EMC protection. The BERNIER Connect CMA SD connector combines 8 contacts, IP68 sealing and a diameter under 16 mm.

The BERNIER Connect CMA SD connector fits 8 contacts into a diameter under 16 mm (0.63 in). It stays IP68 sealed down to 4 m (13 ft) for 24 hours, unmated.

IP67 ensures sealing during temporary immersion, up to 1 m (3.3 ft) for 30 minutes. IP68 goes further, under conditions defined by the manufacturer.  For example, the CMA SD connector is rated IP68 down to 4 m (13 ft) for 24 hours.

Yes. Despite its diameter under 16 mm, the CMA SD connector carries up to 10 Gb Ethernet. As a result, it covers the 100 Mb and 1 Gigabit links used by connected sensors.

Sensors on defense systems often have to operate from -55 °C to +125 °C (-67 °F to +257 °F). The CMA SD connector covers this full range.

The shell material and its surface treatment determine salt spray resistance. For instance, the stainless steel CMA SD connector withstands 96 h of salt spray, 250 h in marine stainless steel and 500 h in marine bronze.

BERNIER Connect offers free CMA SD connector samples through its Sample Center.

Yes. BERNIER Connect has a US warehouse and sales office in Sunnyvale, California. Contact sales@bernier-usa.com.

Developing a military sensor with tight space constraints?

Contact the BERNIER Connect team to discuss your project. Alternatively, order a free CMA SD sample through our Sample Center.

Related Posts